| MICROTHERM STANDARD
BLOCK
|
| High Temperature
Microporous insulation |
| |
| Properties |
|
|
Microtherm® Standard Block is Microtherm®
microporous insulation in its simplest form. It is supplied in a range
of stock thicknesses in the “as made” condition without any covering or
coating. It can be sized or finish machined by the customer to suit the
particular application requirements. Microtherm® Standard
Block is available in Super G grade with a continuous operational
exposure capability of 1000 °C (1832 °F), and in Super A grade with a
continuous operating capability at a full immersion temperature up to
1150 °C (2102 °F). |
| |
| Key benefits |
|
|
Microtherm® Block * microporous insulation offering the
lowest theoretically possible thermal conductivity over a wide
temperature range up to 1000 °C (1832 °F), with a Super A grade
available that is capable of continuous operation at temperatures up to
1150 °C (2102 °F) * •Available from stock in a range of thicknesses for
maximum versatility in use * Environmentally friendly with no known
health hazards.
|
| |
| Your value |
|
|
Microtherm® Block * Microtherm® thermal insulation
has a thermal performance at least 3 to 4 times better than conventional
insulation materials at high temperatures. It has a thermal conductivity
even lower than still air * Microtherm® insulation solutions
occupy much less volume than conventional insulation materials and offer
weight savings * Easily shaped and machined. |
PMR INSULATION
Keeping heat in its place
